Informazioni di Base.
Descrizione del Prodotto
500 Metric Ton/Metric Tons per Month
Standard seaway packing or as client required.
Port
Shenzhen
HSS M42 Steel Bright Round Bar :
Grade:
AISI M42, DIN 1.3247, ASTM A600, JIS SKH59, GB W2Mo9Cr4VCo8
chemical composition%
C | Si | Mn | P | S | Cr | V | W | Mo | Co |
1.00~1.15 | ≥0.65 | ≥0.40 | ≥0.030 | ≥0.030 | 3.50~4.50 | 0.95~1.35 | 1.15~1.85 | 9.0~10.0 | 7.50~8.50 |
Anneal temperature: 860-880
Relief annealing temperature: 720-760
Hardening temperature: 1160-1190
Hardening medium: salt bath under 600,aslo use oil cooling or air cooling
Normal temper temperation: 540-560
RC Rockwell Hardness after hardening and temper: 66-68
Characteristic:
High performance tungsten-molybdenum high speed steel, Excellent performance of hardness, red hardness, thermoplasticity, machinability. Only weak in toughness.
M-42 is a molybdenum-chromium-vanadium-tungsten high speed steel alloy with an additional 8% cobalt. It is widely used in metal manufacturing because of its superior red-hardness as compared to more conventional high speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes. M-42 is also less prone to chipping when used for interrupted cuts and cost less when compared to the same tool made of carbide.
Application:
used in various of complicated tools,e.g pricision broaches, form cutter,professional lathe tool and various high hardness tools as below:
| Broaches | Cold Extrusion Punches | Counter Bores |
| End Mills | Form Cutters | Keyway Cutters |
| Planer Tools | Reamers | Roll Turning Tools |
| Shaving Tools | Taps | Twist Drills |
Standard:
Place of Origin:
Model Number:
Technique:
Application:
Alloy Or Not:
Special Use:
Type:
Tolerance:
Processing Service:
Grade:
surface:
type:
most used:
500 Metric Ton/Metric Tons per Month
Standard seaway packing or as client required.
Port
Shenzhen
HSS M42 Steel Bright Round Bar :
Grade:
AISI M42, DIN 1.3247, ASTM A600, JIS SKH59, GB W2Mo9Cr4VCo8
chemical composition%
C | Si | Mn | P | S | Cr | V | W | Mo | Co |
1.00~1.15 | ≥0.65 | ≥0.40 | ≥0.030 | ≥0.030 | 3.50~4.50 | 0.95~1.35 | 1.15~1.85 | 9.0~10.0 | 7.50~8.50 |
Anneal temperature: 860-880
Relief annealing temperature: 720-760
Hardening temperature: 1160-1190
Hardening medium: salt bath under 600,aslo use oil cooling or air cooling
Normal temper temperation: 540-560
RC Rockwell Hardness after hardening and temper: 66-68
Characteristic:
High performance tungsten-molybdenum high speed steel, Excellent performance of hardness, red hardness, thermoplasticity, machinability. Only weak in toughness.
M-42 is a molybdenum-chromium-vanadium-tungsten high speed steel alloy with an additional 8% cobalt. It is widely used in metal manufacturing because of its superior red-hardness as compared to more conventional high speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes. M-42 is also less prone to chipping when used for interrupted cuts and cost less when compared to the same tool made of carbide.
500 Metric Ton/Metric Tons per Month
Standard seaway packing or as client required.
Port
Shenzhen
HSS M42 Steel Bright Round Bar :
Grade:
AISI M42, DIN 1.3247, ASTM A600, JIS SKH59, GB W2Mo9Cr4VCo8
chemical composition%
C | Si | Mn | P | S | Cr | V | W | Mo | Co |
1.00~1.15 | ≥0.65 | ≥0.40 | ≥0.030 | ≥0.030 | 3.50~4.50 | 0.95~1.35 | 1.15~1.85 | 9.0~10.0 | 7.50~8.50 |
Anneal temperature: 860-880
Relief annealing temperature: 720-760
Hardening temperature: 1160-1190
Hardening medium: salt bath under 600,aslo use oil cooling or air cooling
Normal temper temperation: 540-560
RC Rockwell Hardness after hardening and temper: 66-68
Characteristic:
High performance tungsten-molybdenum high speed steel, Excellent performance of hardness, red hardness, thermoplasticity, machinability. Only weak in toughness.
M-42 is a molybdenum-chromium-vanadium-tungsten high speed steel alloy with an additional 8% cobalt. It is widely used in metal manufacturing because of its superior red-hardness as compared to more conventional high speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes. M-42 is also less prone to chipping when used for interrupted cuts and cost less when compared to the same tool made of carbide.
Application:
used in various of complicated tools,e.g pricision broaches, form cutter,professional lathe tool and various high hardness tools as below:
| Broaches | Cold Extrusion Punches | Counter Bores |
| End Mills | Form Cutters | Keyway Cutters |
| Planer Tools | Reamers | Roll Turning Tools |
| Shaving Tools | Taps | Twist Drills |
Application:
used in various of complicated tools,e.g pricision broaches, form cutter,professional lathe tool and various high hardness tools as below:
| Broaches | Cold Extrusion Punches | Counter Bores |
| End Mills | Form Cutters | Keyway Cutters |
| Planer Tools | Reamers | Roll Turning Tools |
| Shaving Tools | Taps | Twist Drills |
| Products Name | Carbon Steel Bar | |
| Steel Grade | Q195,Q235,Q345, 45#, S20C , SAE1010,SAE1020,SAE1045,EN8,EN19,C45,CK45,SS400 etc | |
| Standard | ASTM A 615 Gr 40/60,BSS4449 Gr460B,500B etc | |
| Diameter | 6mm-1200mm | |
| Length | 3000mm-12000mm or as client's request | |
| Straightness | 3mm/M max | |
| Tolerance | +0.5mm/-0(dia),+5mm/-0(L) | |
| MOQ | 1 tons | |
| Heat treatment | Normalized / Annealed / Quenched / tempered | |
| Surface | black,mill,polished,brush,etc | |
| Test | Ultrasonic test according to SEP 1921-84 G3 C/c | |
| HS Code | 72210000,72221100,72222000,72223000 | |
| Application | Widely used in construction industry for reinforcing concret(Express way; office building, Bridge etc) Trasportation By sea(20' 40' container), parts of larger cross-sections, crankshafts, gears. | |
| Trade Term | FOB, CFR, CIF | |
| Payment | 30% advance by T\T; Balance pay before the shipment against shipping documents or irrevocable LC at sight | |
| Packaging | Export standard, seaworthy | |
| Delivery time | 10-20days after confirmed order | |
| Loading port | Tianjin port , Shanghai port or as client's request | |
| Container size | 20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) | |
| 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) | ||
| 40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) | ||
| Item Type | Diameter (MM) | Length |
| Round Bar | 8~400 | 6/9/12m or follow client's requirment. |
| Steel Wire Rod | 5.5~34 | Coil |
| Steel Rebar | 5.5~40 | Cut to length or Coil |
| Remark | We are sure that we can establish good relationships, feel free to contact us We are sure to satisfy you with our profeessional information. Don't hesitate to contact us. | |
Product Description
| Standard | JIS / ASTM / GB / DIN / EN /AISI |
| Material | Cr12mov H13 SKD11 SKD6 D2 DC53 7CrSiMnMoV 1.2344 1.2379 4Cr13 P20 2738 B40 5CrNiMo 5CrMnMo |
| Diameter | 80-400mm |
| Length | 400-6000mm or be required |
| Technique | Hot Rolled / Forged / Cold Drawn |
| MOQ | 5tons |
| Packing | In bundles tied with steel stripes or as request |
| Payment terms | L/C at sight or T/T (30% as deposit) |
| Delivery time | Usually 7-15 dyas, or upon negotiation |
| Samples | Free samples are provided but the fright is paid by the buyer |
Q1: Are you a trading company or manufacturer?
We belongs to Chengda iron and steel,we also have our own factory for steel raw material sales and machining.Apart from our own mill, we can also provide material from other mills based on customer's different requirement.
Q2:What is the major steel grade your company offer?
S50C/S55C/S45C/1.2311/718/1.2738/1.2316/1.2083/1.2312/1.2714/H13/H11/D2/D3/O1/O2/4140/4340/5140/8620/52100/M2/M35/M42, etc, in round bar, flat bar and plate, and also semi-finished or precision ground flat bars.
Q3:What service does Chengda iron and steel Provide?
Apart from sales of raw materail, we do machining processing like cutting, milling, grinding, turning, peeling, drilling, CNC machining.
Q4: What do you do to control product quality?
Before loadnig into container, all product will go through pre-shipment inspection by our professional QC group. UT test shalled be applied to steel material, according to Sep 1921 C/c,D/d,or E/e level based on different type of steel.
Q5:What is your MOQ?
Our MOQ each order is around 25 Tons(one container), customer can mix different types of steel to reach this quantity.
Q6: Can we visit your company and factory?
Yes, warmly welcome! We can book the hotel for you before you come to China and arrange our driver to our airport to pick you up when you come.